Time to Snap to with Honeywell!
10/23/2014 12:25:00 PM
Honeywell
Honeywell introduces its new MVN line of Control Ball Valves with a snap on easy to assemble valve and actuator. Along with the easy connection, the ball valve also boasts a removable stem which can be changed out while the valve is still inline. This feature cuts down on a lot of labor time, by popping the actuator off and removing two screws the steam is removed and replaced with ease, so if you have a leak in the stem of the valve you do not need to remove and replace the entire unit.

The snap on ball valves come in 2-way and 3-way, Regular or low profile, 1/2” to 1-1/4”, and with a wide range of CV ratings to fit your application. The snap on actuator only comes with the power open/power close option, for the option of a spring return actuator you will still have to use the traditional VBN Ball Valves from Honeywell that have been proven to be reliable over time.

For more information or a working demo of the snap on control ball valve and actuator please contact your George T. Hall Company representative today!

GTH - Bob Pedersen   
        Honeywell Valve

      

Above Left - George T. Hall Company, Commercial Building Controls Sales Representitive, Bob Pedersen with Honeywell’s new Control Ball Valve and Quick Selection Guide.

Above Right - Honeywell’s MVN Control Ball and Actuator

Posted by: Jason Freeman | Submit comment | Tell a friend



Categories: Automation

Share and enjoy: Facebook

 

© Copyright 2018, George T Hall Company. All rights reserved.